BR-22 CUTTING TORCH
![](/img/m/85.jpg)
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
SUPER LITE 27 HELMET
![](/img/m/285.jpg)
SUPERLITE 27 HELMET The SuperLite® 27 helmet has been tested and fulfilled the prerequisites established in Annex II of Directive 89/686 / EEC and complies with EN 250: 2000, EN 250 / A1: 2006 and EN 15333-1: 2008 (class B). Is fully CE validated with SuperFlow® 350 demand regulator and oral / nasal mask P / N 510-690 and P / N 510-747.
KM 37 HELMET
![](/img/m/285.jpg)
The Kirgby Morgan 37 helmet continues the tradition of offering the highest quality and best performance. With a new "Quad-Valve air expulsion system, which can go fitted in most previous Kirby models. Providing less expulsion resistance than the previous system in addition to including even better sealing. recommended for diving in polluted waters.
LARGE FLOW RATE REDUCER 02 HVR
![](/img/m/85.jpg)
The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.
BOAT TOWED METAL DETECTOR PULSE 10 - 12
![](/img/m/629.jpg)
An economical yet powerful boat towed metal detector for ferrous and non-ferrous metals
PVL CUTTING SYSTEM
![](/img/m/479.jpg)
Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees
KM 47 W/MWP HELMET
![](/img/m/285.jpg)
KM 47 HELMET W / COMM The Kirby Morgan 47 helmet comes equipped with a new breathing system, inner mask and air purge system. It has demonstrated performance far superior to any other helmet on the market.
CUTTING ROD CUT 9,5 X 480 mm (3/8") (50 Ud)
![](/img/m/85.jpg)
Exothermic cutting rods burn hot enough to cut ferrous and non-ferrous materials underwater
KM 77 W/MWP HELMET
![](/img/m/285.jpg)
The Kirgby Morgan 77 helmet continues the tradition of offering the highest quality and best performance. The Rex® regulator is standard on this helmet. It allows it to be fitted with other Kirby Morgan regulators, in particular the Superflow® 350 or 455 balanced stainless steel regulator.
DPR-275 DIVER PINGER RECEIVER
![](/img/m/450.jpg)
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
BR-22 PLUS CUTTING TORCH
![](/img/m/85.jpg)
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
KM 77 HELMET
![](/img/m/285.jpg)
KM 77 HELMET: The Kirby Morgan® 77 maintains the Kirby tradition by always offering the best quality coupled with superior performance. The Rex® regulator is standard on this helmet. It can be fitted with other Kirby Morgan regulators, including the Superflow® 350 or the 455 Stainless Balanced Regulator.
ATT-400 ACOUSTIC TARGET TRANSPONDER
![](/img/m/450.jpg)
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
CUTTING ROD CUT 9,5 X 910 mm (3/8") (25 Ud)
![](/img/m/85.jpg)
Exothermic cutting rods burn hot enough to cut ferrous and non-ferrous materials underwater
KM 37SS STAINLESS STEEL W/MWP HELMET
![](/img/m/285.jpg)
The Kirby Morgan® 37SS Helmet is the first of a generation of diving helmets that combine great durability and extraordinary performance. The frame is 1/8 "thick of mechanized molten stainless steel. This highly corrosion resistant material provides exceptional product life.
KM 97 W/MWP HELMET
![](/img/m/285.jpg)
KM 97 W / MWP HELMET The Kirby Morgan® 97 helmet has a 455 compensated regulator. The 455 compensated regulator is made completely of stainless steel and offers virtually the same breathing performance as the REX regulator.
ULB-350 LOW COST LOCATION BEACON
![](/img/m/450.jpg)
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
AH5 FREE FLOW HELMET
![](/img/m/145.jpg)
The Divex AH5 is the successor to the Divex AH3 and AH4, the helmets which have been chosen by most professional divers as standards of safety, quality, performance and reliability.
PRS275 PINGER RECEIVER SYSTEM
![](/img/m/450.jpg)
The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.